Product introduction
The soluble solid content of the flame retardant WFF in the phosphorus and nitrogen system was 28.6%. The flame retardant is a colorless transparent solution with a pH of about 7.4. The solution is colorless, tasteless, nontoxic, non corrosive, strong permeable, simple in process and good in flame retardancy, and can maintain the feeling and luster of the fabric itself well. It is suitable for cotton, linen, blended, chemical fiber, wood, paper products and other flame retardants.
The solution is a non durable flame retardant.
Ionized: water solubility, neutrality
Usage:
1. Immersion method (soaking method)
Two dipping is two rolling, the rolling rate is 60%-80%, the drying temperature is 100 C -120 C
Cotton, linen and blended fabric: 5-6m2/kg
Polyester and chemical fabric: 3-5 m2/kg
Three ply paper: 4-6, m2/kg
Two. Spray method
1. is suitable for the installed curtain, wallpaper, filter paper, carpet and wood board, etc.
2. spray tools: atomizing spray gun, compressed air pump.
3. spray method: spray 2-3 times (to be dried again 2, 3 times)
4. natural drying
5. Applicable Quantity
Cotton, linen and blended fabric: 3-5 m2/kg
Polyester and chemical fabric: 3-5 m2/kg
This product can be used in combination with water repellent, osmosis agent and softener according to the actual situation of the material.
Flame retardant grade B1; damage length is less than or equal to 60mm; flame retardant time is <5 seconds; afterflame time for 0 seconds
Packing: net weight 50kg/ barrel