Product introduction
ADK STAB FP-2200 is a new type of halogen-free phosphorus flame retardant, which is mainly used for polyolefin. ADK STAB FP-2200 gives polyolefin excellent flame retardancy, low density, high mechanical properties and so on. ADK STAB FP-2200 and thermoplastic phase, exhibit superior stability and processing. It is recommended for polypropylene polymer PP-H, elastomer, polypropylene block copolymer (PP-B), high density polyethylene (HDPE), low density polyethylene (LDPE), ethylene vinyl acetate copolymer (EVA) and other resins.
Product (name) Features (feature) Application (use)
ADKSTAB FP-2100JC H eat resistance
High heat resistance PP, PE, TPE
ADKSTAB FP-2200 Flame retardancy
Flame retardancy PP, PE, EVA, TPE
ADKSTAB FP-2200S Flame retardancy
Flame retardancy TPE, PP, PE


Characteristic
Adding 18-20%FP-2200 in the PP material and using the small amount of PTFE can give play to the excellent flame retardancy and reach the UL-94/V-0 standard. Therefore, compared with the inorganic magnesium hydroxide flame retardant, it has the advantages of small addition, low density and improving the mechanical properties of the polymer.
Excellent thermal stability and processing performance.


Recommended processing molding conditions
It is recommended at 250 degrees for processing (extrusion and injection molding).
FP-2200 is acidic, please use a processing machine with acid resistance.


physical property
White powder
No melting point (270 degrees above decomposition)
Particle size 51%D 5.0um 90%D 11.0um
Nitrogen containing rate 19-23%
Phosphorus content 19-20%
The proportion is about 0.3-0.4
Analysis conditions of volatile TG (10 degree C/min, in air)
Weight reduction 5% 287 degrees C


The effect of flame retardancy in PP, UL-94 experiment
Table 1: and 0.2% PTFE with 1.6 mm thickness PP reach UL-94 V-0 level, the required amount of FP-2200
Adding amount of flame retardant to UL-94 V-0 level (WT%)
PP-H PP-B
ADK STAB FP-2200 17-19 18-20
APP Type F.R 20-25 25-30
Stabilization: ADK STAB AO-60 (0.1) /ADK STAB 2112 (0.1) /Ca-St (0.1) /PTFE (0.2%)
Processing conditions: extrusion granulation: 220 degree C, 150rpm (30mm o twin screw)
Injection molding: 220 C
Smoke test (adding PP-B of FP-2200)
The smoke value of PP-B added with FP-2200 is lower than that of PP added brominated flame retardants. Compared with PP added with magnesium hydroxide, the smoke value is almost the same, but the amount of added tobacco is much less.


The effect of flame retardancy in PP
Adding 18% components to PP-B and with 0.2% PTFE (polytetrafluoroethylene) can reach UL-94 V-O.
Because of the low filling amount, it has the following characteristics compared with the other series of flame retardants.
- low density (Lighter material)
- improve mechanical performance (e.g. Tensile properties, HDT, etc.)
The flame retardancy of Table4: in PP-B.
Formula Control ADK STAB
FP-2200 Mg (OH) brominated flame retardant *
PP-B (anti impact polypropylene) (MI=10) 100824059
Flame retardant - 186020
Sb O - - 7
PTFE (polytetrafluoroethylene) - 0.2 - -
Talc (talcum powder) - - 14
[flame retardancy];
UL-94V, 1.6mm thickness NR V-0 V-2 V-2
[physical properties]
Density (g/cm 0.90 1.02 1.40 1.28 fand)
Tensile strength (MPa) 28.4 23.6 18.4 25.9
Tensile force (%) 235551134
Thermal deformation temperature (C) 103122115130


Packing
20KG/ package, containing tin foil.