水溶性涂料专用无卤阻燃剂TZ-IFF

 

product description

 

The main component of this
product is organic phosphinate flame retardant mixture, mainly for water-based
acrylic and water-based polyurethane resin mixed with flame retardants. This
product is developed by our company TROZU special resistance brand products,
the main advantages are: high flame retardant content, to solve the powder when
the physical problems, the main application and added to the water-based resin
coating and coating. Due to the mode of operation, the thickness of the coating
fabric and the material is not the same amount of added, before use, must be
fully tested before use.

 

 

index

 

The main component of
phosphorus and halogen-free flame retardant mixture

 

Appearance white high
viscosity slurry

 

Solid content of more than
60%

 

Specific gravity (20 ℃)
1.3

 

Safe storage without
solidification, no precipitation

 

Solubility is easy to
disperse into aqueous resin

 

 

Instructions

 

After adding TZ-IFF to the
aqueous resin, the coating is applied to the fabric, or after the viscosity is
increased, Knife Coating is used for flame retardant on the surface of the
fabric. Suggested additions: 25-40%.

 

 

Save

 

Dry and cool place, to avoid
direct heat

产品介绍 本产品主要成分为有机次膦酸盐的阻燃混合物, 主要适用于水性亚克力和 水性氨基甲酸乙酯树脂混配用阻燃剂。
本产品为我公司开发的TROZU特阻牌产品,主要优点为:阻燃含量高,解决粉末作业时物性难题, 主要适用与添加到水性树脂涂料和涂层用。
因作业方式,涂层布料厚度及材质有所不同添加量也不一样, 使用之前,必须充分试验 以后方可使用。

指标主要成分 磷系及无卤阻燃剂混合物外观 白色高粘度浆料固含量 60% 以上比重(20℃) 1.3安全性储存 无凝固,无沉淀溶解性 易于分散到水性树脂

使用方法

把TZ-IFF适量添加到水性树脂以后涂层到布料, 或者增加粘度 以后 Knife Coating 用于纺织物表面的阻燃。建议添加量： 25-40%。

保存

干燥阴凉处,避免直晒发热处