Because of the flame retardant efficiency, environmental protection, efficiency, 

convenience and so on, the flame retardant masterbatch has become an effective

 substitute for the traditional flame retardant and has been widely used in the 

various aspects of plastic granulation, extrusion, injection molding and other aspects,

The effective flame retardant masterbatch is also known as the flame retardant

 masterbatch for modified plastics plant. The following advantages of using functional 

flame retardant masterbatch in modification plant

1. Reduce cost

With the progress of science and technology, the continuous development of carrier

 plastics and equipment, high concentration, high dispersion and high compatibility are

 possible. A small amount of carrier is no longer the main cause affecting the flame

retardancy. Thus, the ideal condition of the exchange of flame retardant and powdery 

flame retardant is realized, and the flame retardant effect is not constant, and the

 flame retardancy efficiency is improved. Together with the organic combination of 

the fire-retardant masterbatch, the cost is reduced by the collective purchase, and

 the cost advantage of the flame retardant masterbatch is guaranteed, so that the

 cost can be effectively reduced after the customer is used.

Two, improve efficiency

The use of flame-retardant masterbatch makes the material more convenient, 

shorten the time, improve the working efficiency, and improve the mixing 

efficiency, and make the material more compact and uniform, and avoid the

 unevenness of using the powder to sink to the bottom of the pot. The automatic

 suction machine can also be used to realize unmanned operation.

Three, increase production capacity

As the feeding speed of the flame retardant masterbatch is more smooth than 

that of the powder, the material is more easily plasticized and mixed evenly in the 

screw, the friction force becomes smaller, the screw speed can be improved

 properly, and the productivity is increased by more than 30%.

Four. Good dispersion

As the flame retardant masterbatch itself is completely plasticized at a low

 temperature, the dispersion of each material will be better after plasticizing

 again, and the properties, glossiness and surface of the material are improved accordingly.

Five. The environment is clean and tidy

The flame retardant masterbatch is used directly with the plastic particles, 

the whole process has no fly dust flying, the screw under the screw is clean,

 the screw is not bonded to the screw, and there is no cross contamination,

 making the material more safe and the stability of the product quality.